Rope manufacturer of spun-bonded non-woven fabric is made up of high strength of continuous filament, holds a large proportion in the disposable protective clothing market, the new development method of spun-bonded non-woven fabric is in the production process of adding special additives or finishing, make the product characteristics of flame retardant, antistatic, radiation protection, hydrophobic guide wet, antibacterial, thermal, and other functions.
There are two kinds of rope belt manufacturers: woven belt and knitted belt. Webling, especially jacquard webling, is somewhat similar to the process of cloth marking, but the warp of cloth marking is fixed and the pattern is expressed by the weft. The basic weft of the ribbon is fixed, and the pattern is expressed by the warp yarns with a small machine. Each printing, production and adjustment of the machine may take a long time and is relatively inefficient. But it is possible to produce a wide variety of dazzling products, not always the same faces as cloth labels. The main functions of ribbon are decorative and functional. Such as the popular mobile phone sling. After the belt is woven, you can also screen print all kinds of text/patterns, which is generally cheaper than weaving the text and patterns directly.
MS non-woven fabric is spun-bonded and melt-blown composite products, has high strength, good filtering performance, excluding adhesive, and the advantages of non-toxic, has been in the field of medical and industrial filter material played an important role, new application is to use SMS breathable, do not produce fiber dust, prevent the body to the characteristics of particle exchange with the outside world, be used for pharmaceutical, biotechnology, photoelectron processing, electrical components and chips need highly clean production environment.
Convex and concave and convex fabric, the front is tight and delicate, with strips or patterns convex, and the opposite is coarser, with longer floats. Raised fabric: a single raised fabric with a plush side for the fabric front. Double - sided plush fabric, with plush smooth, neat side for the front. Observe the fabric edge: if the fabric edge is smooth and clean, the neat side is the front of the fabric, double, multi-layer and multi-fabric, if the warp and weft density of the front and the back are different, generally the front has higher density or the raw material of the front is better. Leno fabric: the front of the fabric is the prominent side with clear and twisted threads. Towel ribbon: the side with high density of terry rings is the front.
The value of rope is relatively low in the value of the whole set of automatic production line or conveying equipment, but it is an indispensable part of the normal operation of relevant equipment. Once problems occur, it will have a significant adverse impact on the daily production and management of customers. Therefore, downstream direct users have higher requirements for service timeliness, which requires enterprises to be able to timely understand the use of customers' conveyor belt and be able to respond to their demand for replacement and repair of conveyor belt in a short time. Therefore, the construction of market service network is one of the important ways for light rope enterprises to cope with market competition.
Scan is watching us
address：No. 18, ma shi road, ma ling administration district, zhongshan shinan district, guangdong province